Adirondack Table And Chair Set


adirondack table and chair set 1

Adirondack Table And Chair Set

Most Popular Author Copy Created with Sketch. By Neal Barrett Mar 21, 2017 These Adirondack chair plans will help you build an outdoor furniture set that becomes the centerpiece of your backyard.It’s a good thing that so many plastic patio chairs are designed to stack, and the aluminum ones fold up flat. That means we can get them put away and stored out of sight as quickly as possible. But, if you think outdoor furniture should enhance your yard and garden, consider a chair that evolved on the porches of summer homes and resorts of upstate New York. It’s an object that no one will want to hide, because it simply looks so good: the Adirondack chair.Advertisement – Continue Reading BelowOur version has come a long way from the early types that had flat backs and seats — and, we’ve added a matching table so you’ll have a stylish surface for cool drinks and a good book. Although there are a few angles and curves to cut, there’s no fancy joinery — everything’s held together with corrosion-resistant deck screws. We used cedar for these pieces because it stands up well to the elements, and it’s available in the required 3/4- and 1-in. thicknesses. You could substitute pine if you plan to keep the pieces out of the weather. Most PopularIf you’re building more than one chair, it pays to make templates for parts like the side rails, arms and back rails. The patterns also will come in handy when your friends see your work and ask you to make chairs for them.Model designed in Alibre Design Xpress. Get your FREE copy today!View a larger version of this animationorDownload printable plans of the Adirondack chair and table.(Requires Adobe Reader).MATERIALS LISTQTY.SIZEDESCRIPTIONA21 x 5-1/4 x 33-3/4″cedar side railB11 x 4-1/4 x 23-1/4″cedar top back railC11 x 3-1/2 x 23-1/4″cedar bottom back railD93/4 x 2-1/4 x 23-1/4″cedar seat slatE73/4 x 3-1/4 x 35-1/2″cedar back slatF21 x 4-1/4 x 20-1/2″cedar front legG21 x 2-1/2 x 29″cedar back legH21 x 2-3/4 x 6-1/2″cedar arm bracketI21 x 5-1/4 x 28″cedar armJ21 x 5-1/4 x 16″cedar footK21 x 1-1/2 x 19-1/4″cedar cleatL21 x 5 x 16-1/2″cedar legM23/4 x 5 x 17-1/2″cedar stretcherN51 x 3-3/4 x 24″cedar slatOas required1-5/8″ No. 8fh deck screwPas required2″ No. 8fh deck screwMaking the Chair SeatLay out the side-rail shape on your stock, cut to the lines with a jigsaw and sand the edges smooth. Then, cut the back rails to size, and saw the curves that give the chair back its concave shape. Note that the cut on the top rail is square, while the bottom rail has a 7-degree bevel. Advertisement – Continue Reading BelowCut the seat slats to size and round the upper edges of each with a 1/4-in. quarter-round bit in a router table. Then, round the exposed edges — those that won’t abut other parts — of the side and back rails. Keep the router table set up for this job so you can round the edges of the other parts as they’re made.Because of the shape of the seat, most of the slats require bevels on one or both edges. Use a table saw or hand plane to cut the bevels.Start seat assembly by screwing the lower back rail to the seat sides with one screw at each end of the rail. Then, add slat No. 4 as indicated in the drawing, again using only one screw at each end . Measure opposite diagonals of the subassembly and adjust it until it’s square. When you’re satisfied, add a second screw to each end of the two slats to lock the pieces in position. Use a 1-in.-thick block as a spacer to position the rear seat slat . Then install the remaining slats. Because the seat is curved and many of the slat edges are angled, don’t try to measure these spaces. Instead, simply arrange the slats by eye so that they appear uniform. Advertisement – Continue Reading Below
adirondack table and chair set 1

Adirondack Table And Chair Set

Author Copy Created with Sketch. By Neal Barrett Mar 21, 2017 These Adirondack chair plans will help you build an outdoor furniture set that becomes the centerpiece of your backyard.It’s a good thing that so many plastic patio chairs are designed to stack, and the aluminum ones fold up flat. That means we can get them put away and stored out of sight as quickly as possible. But, if you think outdoor furniture should enhance your yard and garden, consider a chair that evolved on the porches of summer homes and resorts of upstate New York. It’s an object that no one will want to hide, because it simply looks so good: the Adirondack chair.Advertisement – Continue Reading BelowOur version has come a long way from the early types that had flat backs and seats — and, we’ve added a matching table so you’ll have a stylish surface for cool drinks and a good book. Although there are a few angles and curves to cut, there’s no fancy joinery — everything’s held together with corrosion-resistant deck screws. We used cedar for these pieces because it stands up well to the elements, and it’s available in the required 3/4- and 1-in. thicknesses. You could substitute pine if you plan to keep the pieces out of the weather. Most PopularIf you’re building more than one chair, it pays to make templates for parts like the side rails, arms and back rails. The patterns also will come in handy when your friends see your work and ask you to make chairs for them.Model designed in Alibre Design Xpress. Get your FREE copy today!View a larger version of this animationorDownload printable plans of the Adirondack chair and table.(Requires Adobe Reader).MATERIALS LISTQTY.SIZEDESCRIPTIONA21 x 5-1/4 x 33-3/4″cedar side railB11 x 4-1/4 x 23-1/4″cedar top back railC11 x 3-1/2 x 23-1/4″cedar bottom back railD93/4 x 2-1/4 x 23-1/4″cedar seat slatE73/4 x 3-1/4 x 35-1/2″cedar back slatF21 x 4-1/4 x 20-1/2″cedar front legG21 x 2-1/2 x 29″cedar back legH21 x 2-3/4 x 6-1/2″cedar arm bracketI21 x 5-1/4 x 28″cedar armJ21 x 5-1/4 x 16″cedar footK21 x 1-1/2 x 19-1/4″cedar cleatL21 x 5 x 16-1/2″cedar legM23/4 x 5 x 17-1/2″cedar stretcherN51 x 3-3/4 x 24″cedar slatOas required1-5/8″ No. 8fh deck screwPas required2″ No. 8fh deck screwMaking the Chair SeatLay out the side-rail shape on your stock, cut to the lines with a jigsaw and sand the edges smooth. Then, cut the back rails to size, and saw the curves that give the chair back its concave shape. Note that the cut on the top rail is square, while the bottom rail has a 7-degree bevel. Advertisement – Continue Reading BelowCut the seat slats to size and round the upper edges of each with a 1/4-in. quarter-round bit in a router table. Then, round the exposed edges — those that won’t abut other parts — of the side and back rails. Keep the router table set up for this job so you can round the edges of the other parts as they’re made.Because of the shape of the seat, most of the slats require bevels on one or both edges. Use a table saw or hand plane to cut the bevels.Start seat assembly by screwing the lower back rail to the seat sides with one screw at each end of the rail. Then, add slat No. 4 as indicated in the drawing, again using only one screw at each end . Measure opposite diagonals of the subassembly and adjust it until it’s square. When you’re satisfied, add a second screw to each end of the two slats to lock the pieces in position. Use a 1-in.-thick block as a spacer to position the rear seat slat . Then install the remaining slats. Because the seat is curved and many of the slat edges are angled, don’t try to measure these spaces. Instead, simply arrange the slats by eye so that they appear uniform. Advertisement – Continue Reading Below
adirondack table and chair set 2

Adirondack Table And Chair Set

These Adirondack chair plans will help you build an outdoor furniture set that becomes the centerpiece of your backyard.It’s a good thing that so many plastic patio chairs are designed to stack, and the aluminum ones fold up flat. That means we can get them put away and stored out of sight as quickly as possible. But, if you think outdoor furniture should enhance your yard and garden, consider a chair that evolved on the porches of summer homes and resorts of upstate New York. It’s an object that no one will want to hide, because it simply looks so good: the Adirondack chair.Advertisement – Continue Reading BelowOur version has come a long way from the early types that had flat backs and seats — and, we’ve added a matching table so you’ll have a stylish surface for cool drinks and a good book. Although there are a few angles and curves to cut, there’s no fancy joinery — everything’s held together with corrosion-resistant deck screws. We used cedar for these pieces because it stands up well to the elements, and it’s available in the required 3/4- and 1-in. thicknesses. You could substitute pine if you plan to keep the pieces out of the weather. Most PopularIf you’re building more than one chair, it pays to make templates for parts like the side rails, arms and back rails. The patterns also will come in handy when your friends see your work and ask you to make chairs for them.Model designed in Alibre Design Xpress. Get your FREE copy today!View a larger version of this animationorDownload printable plans of the Adirondack chair and table.(Requires Adobe Reader).MATERIALS LISTQTY.SIZEDESCRIPTIONA21 x 5-1/4 x 33-3/4″cedar side railB11 x 4-1/4 x 23-1/4″cedar top back railC11 x 3-1/2 x 23-1/4″cedar bottom back railD93/4 x 2-1/4 x 23-1/4″cedar seat slatE73/4 x 3-1/4 x 35-1/2″cedar back slatF21 x 4-1/4 x 20-1/2″cedar front legG21 x 2-1/2 x 29″cedar back legH21 x 2-3/4 x 6-1/2″cedar arm bracketI21 x 5-1/4 x 28″cedar armJ21 x 5-1/4 x 16″cedar footK21 x 1-1/2 x 19-1/4″cedar cleatL21 x 5 x 16-1/2″cedar legM23/4 x 5 x 17-1/2″cedar stretcherN51 x 3-3/4 x 24″cedar slatOas required1-5/8″ No. 8fh deck screwPas required2″ No. 8fh deck screwMaking the Chair SeatLay out the side-rail shape on your stock, cut to the lines with a jigsaw and sand the edges smooth. Then, cut the back rails to size, and saw the curves that give the chair back its concave shape. Note that the cut on the top rail is square, while the bottom rail has a 7-degree bevel. Advertisement – Continue Reading BelowCut the seat slats to size and round the upper edges of each with a 1/4-in. quarter-round bit in a router table. Then, round the exposed edges — those that won’t abut other parts — of the side and back rails. Keep the router table set up for this job so you can round the edges of the other parts as they’re made.Because of the shape of the seat, most of the slats require bevels on one or both edges. Use a table saw or hand plane to cut the bevels.Start seat assembly by screwing the lower back rail to the seat sides with one screw at each end of the rail. Then, add slat No. 4 as indicated in the drawing, again using only one screw at each end . Measure opposite diagonals of the subassembly and adjust it until it’s square. When you’re satisfied, add a second screw to each end of the two slats to lock the pieces in position. Use a 1-in.-thick block as a spacer to position the rear seat slat . Then install the remaining slats. Because the seat is curved and many of the slat edges are angled, don’t try to measure these spaces. Instead, simply arrange the slats by eye so that they appear uniform.

Adirondack Table And Chair Set

Adirondack Table And Chair Set
Adirondack Table And Chair Set
Adirondack Table And Chair Set
Adirondack Table And Chair Set

Wallpaper Name : Adirondack Table And Chair Set
Categories : News
Views : 61 Views
Downloads : 0
Tags :

Description : Download Adirondack Table And Chair Set HD Widescreen Wallpaper from the above resolutions from the directory News. Posted by admin on March 24, 2017 If you don’t find the exact resolution you are looking for, then go for Original or higher resolution which may fits perfect to your desktop.

Comments